Some of our services include the following:

Industrial Cleaning Services

Dry ice blasting (CO2 blasting) is a fast, easy, and cost-effective way to clean, maintain and manage your production equipment. Dry ice blasting will effectively clean years of dirt, grease, oil, and product buildup. Starr Restoration Services, Inc. will clean using dry ice pellets that disintegrate and dissipate upon impact, adding zero additional waste.

Routine maintenance with dry ice blasting is quick and helps to reduce costly downtime. Years of buildup can be cleaned in place (CIP) on industrial equipment, machinery, machine tools, curing ovens, assembly line equipment, hydraulic power units, electrical power, control and distribution components, conveyor components, mixers, hoppers, ovens, extruders, part carrying fixtures, ink-jet overspray on conveyor rollers, electronics and valuable production hours are maximized.

Dry ice blasting can be used for paint preparation on equipment in place, eliminating costly downtime associated with disassembly and hand cleaning. Most equipment can be cleaned in place with the use of temporary barricades placed around equipment.

Dry ice blasting is a safe, nonabrasive process without damaging delicate circuitry or bearings.

Benefits:

  • Increased cleaning efficiency

  • Eliminate harsh chemicals & safety concerns

  • Clean equipment, hot and in place (CIP)

  • Eliminates waste runs after cleaning, zero additional waste

  • Eliminate costly labor associated with the disassembly as well as the reassembly of equipment

  • Teaming with your maintenance crews, allowing them to perform their jobs more effectively

Historical Restoration

Dry ice blasting allows safe, effective, and fast restoration of historical items, allowing you to save time, labor, clean-up, and disposal costs.

  • Thorough cleaning in tight areas

  • Reduced cleaning time and associated labor costs

  • No secondary waste

  • Reduced encapsulation needs

  • Non-abrasive, won’t damage the substrate

  • Enhanced worker safety

  • Chemical-free process

  • Environmentally responsible

Structural Cleaning and Smoke Sealing

FIRE RESTORATION CONTRACTORS have come to depend on BIBS to provide turnkey cleaning solutions. We are your partner working with you, not against you.

By Providing:

  • Turnkey pricing (Control Costs)

  • Complete blasting packages (no need to rent or purchase expensive equipment)

  • Fast turnaround (trained personnel)

  • Pricing is based on most major software

Cleaning up from fire damage can cost you valuable time and money when using traditional methods. CO2 Cleaning or Dry Ice Blasting has become the preferred method for removing smoke, soot, vaporized synthetic resins, and char, and reduces the musty, burnt smell that results from a fire disaster. It is a fast and efficient way of removing smoke and fire damage, reducing your downtime and allowing your business to recover faster and be back up and running.

Benefits To You:

  • The fastest rate of removal

  • Environmentally friendly – no secondary waste, dust-free cleaning

  • A natural biocide

  • Minimizes demolition

  • Eliminates sanding & scraping

  • Versatile – greater access to tight areas

  • Better penetration – behind & between structural members without damage to surface integrity

  • Cleans electrical outlets, conduits, ceiling fans, etc.

Paint and Graffiti Removal

Graffiti Removal Services St. Louis

BIBS provides graffiti removal services for areas in and around St. Louis. We provide a safe, reliable, fast, and efficient process for removing unwanted markings and tags. Unwanted tags and markings can send the wrong message and possibly cause a loss in business.

BIBS can completely remove the paint with our many cleaning options and over 30 years of experience. Graffiti can be removed faster when it is still fresh, saving you money. Also, the sooner it is removed the better in order to discourage future tagging.

We can remove the tags within 24 hours of your call.

Electrical Components/Motors Cleaning

CO2 Blast Cleaning or Dry Ice Blasting is nonabrasive and allows the most sensitive surfaces to be cleaned. Since the process is non-conductive it is the logical choice for cleaning electrical and electronic applications.

Motor generators, turbine generators, AC motors, DC motors, diesel generators, hydro generators, switchboards, and circuit breakers are effectively cleaned and back to peak performance with Starr Restoration Services, Inc. CO2 blast cleaning.

Low meg-ohm readings and equipment failures can be caused by carbon, grease, and dirt. CO2 cleaning/Dry Ice Blasting removes these contaminates, allowing more accurate readings and restoring machine efficiency.

CO2 cleaning/Dry Ice Blasting leaves only the material removed for disposal, with no additional waste.

This makes the process more environmentally friendly.

  • Reduce catastrophic failures

  • Restore efficiency without power disruptions

  • Reduce outage time

  • Improve meg ohm readings

  • Improve thermal dissipation

  • Eliminate hazardous solvents and secondary waste

  • Eliminate conductive cleaning agents

CO2 Cleaning Armature Onsite prior to rewind Closeup.

Food Processing Industry

BIBS can provide a fast and easy way to handle your contract cleaning needs.

We can provide CO2 blast cleaning/Dry Ice Blasting for your industry as needed or on a regularly scheduled maintenance program. CO2 pellets are accelerated by compressed air to clean a surface upon impact. Unlike other traditional methods, CO2 blasting/Dry Ice Blasting is non-abrasive, non-conductive, and disappears on contact. Since the pellets evaporate upon contact, no secondary waste is created.

FDA, EPA, and USDA approved, this process is safe and can be used in any environment.

Applications: Conveyors, Shaker Beds, Freezers, Ovens, Mixing Equipment, Electric Motors, Ceilings & Walls, Steps, Work Areas, Glass, Ceramics, and Floors

Printing Industry

BIBS can provide you with a fast, easy, cost-effective, dry ice-blasting maintenance program. With regular more efficient cleaning, you will receive the benefits of:

Benefits:

Reduced Downtime

Better print quality and decreased scrap

Reduced wear on machine parts

No hazardous waste and solvent disposal

No injuries due to hazardous solvents

The removal of ink and varnish polymers is time-consuming and difficult with ordinary solvents. CO2 Cleaning/Dry Ice Blasting reduces cleaning time and produces a far more thorough cleaning than other traditional methods. Dry ice pellets have the mass and density required to remove all types of solvent and water-based inks and varnishes without damaging equipment.